- Spax Stick Pro for concealed mounting of wooden terraces on wood and aluminium, new design for higher load capacity and more stability
- Easy installation, no squeezing of the substructure, with aluminium substructure: 3 mm wall thickness for needle and 4 mm for hardwood planks
- Decking thickness max. 24 mm, mounting point min. 20 mm, plank width for tropical wood max. 130 mm, no waterlogging thanks to ventilation bar effect
- Suitable for: wooden planks up to max. 25 mm plank thickness, Douglas fir, pine, European larch, oak, Garappa, Bangkirai, Ipe (max. 21 x 130 mm), thermal woods (if necessary Please note the manufacturer's instructions); not suitable for: Siberian larch, Cumaru, Bongossi, Massaranduba, wood composite planks (WPC)
- Box contents: 120 x Spax Stick Pro, 70 x Spax Cylinder Head A2 Stainless Steel Black 4.5 x 28 mm, 240 x Spax Cylinder Head Wirox 4.5 x 22 mm, 1 x Bit Spax T-Star Plus T20 Length 50 mm, 1 x Handle Box L
Spax Stick Pro for 3 m²; 120 sticks including matching cylinder head screws in handle box L. For invisible fixing of wooden terraces on wood and aluminium. The concealed connector Spax Stick Pro ensures a flawless look. Easy and safe installation is guaranteed. The high mechanical strength of the Stick Pro gives the decking boards high stability. Squeezing the substructure is practically impossible thanks to the large contact surface of the Spax Stick Pro. The matching cylinder head screws are included in the package. How does it work? Screw the first plank from below (e.g. with an angle screwdriver) or alternatively visibly screw it. Per substructure, 2 Spax sticks per per are attached to the back of the floorboard. The board is then turned over and pushed to the already screwed board. You slide the front Spax Stick Pro under the last floorboard; the Spax sticks are screwed on the UK. The next board is done the same way. The middle bridge serves as a stop when putting on and screwing the sticks on the board. When contracting the decking board to adjust the joint width, use the Spax Spacer (joint gauge). Additional advantage: the Spax Stick Pro acts like a ventilation bar (similar to Spax Air). This prevents waterlogging on the edges of the boards. Instructions for use: suitable for: wooden planks up to max. 25 mm plank thickness, Douglas fir, pine, European larch, oak, Garappa, Bangkirai, Ipe (max. 21 x 130 mm), thermal woods (if necessary Please note the manufacturer's instructions); not suitable for: Siberian larch, Cumaru, Bongossi, Massaranduba, wood composite planks (WPC). For very hard import woods, pre-drilling of diameter 3 mm is recommended as well as the substructure max. every 40 cm. Observe the enclosed assembly instructions (English language not guaranteed).
- Is Discontinued By Manufacturer : No
- Product Dimensions : 6.69 x 10.24 x 4.72 inches; 4.03 Pounds
- Date First Available : March 8, 2019
- Manufacturer : Spax
